home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Floppyshop 2
/
Floppyshop - 2.zip
/
Floppyshop - 2.iso
/
diskmags
/
4671-5.790
/
dmg-5786
/
030_206.doc
next >
Wrap
Text File
|
1996-01-18
|
9KB
|
209 lines
********************************
ATTENTION FALCON/TOS 2.06 USERS
********************************
As you know there can be problems using some STOS programs, well, as
I want the '+' in ST+ to mean something I have included on the disk
STOS FIX v3.0 and MEGA DEPACK 2.
I assume you know how and what to do with these programs but for
those of you that are either new to TOS 2.06 or your Falcon here are a
few instructions on how to get ST+ up and running on your system.
First copy the folders named 'PD' and 'FRONTIER' to another disk as
this allows room for the DCK.PRG to unpack where it is, then:-
1, Load up 'MEGA_DP2.PRG' (this is your UNpacker program).
2, When your presented with the OPTIONS screen select 'LOAD & UNPACK.
3, The file selector will appear, select DCK.PRG and click 'O.K.'.
4, The DCK.PRG file will now be loaded into memory.
5, Again from the OPTIONS screen select SAVE, again you will be
presented with the file selector, once more select DCK.PRG and click
'O.K.'.
6, Mega depack will now save the unpacked DCK.PRG file to its original
location.
7, Right, you now have an UNpacked DCK.PRG file, time to kick in STOS
FIX v3.0.
8, Please read the text below for to be honest as I have never had any
use for any of the STOS fix programs I have no idea how they work so
I'll leave it to the expert, one Mr.Robert Quezada.
STOS FIXER VERSION 3.0
(C) 1994 Robert Quezada
Release date: May 10, 1994
USE THIS AT YOUR OWN RISK. I WILL NOT BE RESPONSIBLE FOR ANY LOSS OF
FILES.
Brief Description
-----------------
This program was written using HiSoft Basic 2.10. It calculates the
STOS values required for STOS interpreter and STOS compiled programs
for virtually all TOS versions.
Requirements
------------
This should work on any TOS version, on machines with 512k minimum,
and any resolution.
It requires that the file is not compressed (with ATOMIK, PACK-ICE,
etc.). It will check if the file is compressed and will often not
write the changes to the file, but if it does, it changes the original
file extension to .123, so that you will always have the original
file.
NOTE:
-----
DO NOT USE THIS PROGRAM TO UPDATE COMP_xxx.PRG (the STOS compiler
file) or C3D.PRG (the STOS 3D accessory program) BECAUSE THEY WILL NOT
WORK PROPERLY AFTERWARDS.
If the file is compressed, it can be decompressed with Mega Depack,
which is available on GEnie(file #24286) and probably on other network
systems.
FIXES
-----
Ver 2.0
The joystick address finding routine has been fixed to work with less
joystick movement. In order for it to work, the joystick must be in
port #1 (not the mouse port, in case you didn't know). Then, just
follow the on screen instructions and then the address will be found.
Ver 2.1
Can now be placed on the desktop and will fix STOS files if the
programs are dragged onto it. If your TOS supports that (which should
be any TOS version 2.05 or higher), then click on STOSFX27.prg once,
and then go to the INSTALL APPLICATION menu on the desktop. You must
install the default directory as APPLICATION and the parameter as FULL
PATH.
Then, you drag the icon onto the desktop and save the desktop, so all
those changes will be saved. Every time you want to fix a file so it
will work on your TOS version, all you have to do is drag the file to
be fixed onto the STOS fixer's icon, it will fix the file for you and
then return to the desktop.
Run time STOS programs are now supported in this version. They are
fixed in the same way that compiled STOS programs are fixed. One
example of this would be Psycho Pig 2 (available on GEnie). On disk 1,
BOOT.PRG is a run time STOS program.
Version 2.6 (August 1993)
-------------------------
NOT RELEASED TO PUBLIC DOMAIN
Calculations of the last 2 values in the table were incorrect, but is
now fixed for the Falcon030 and some other STs in previous versions.
Version 2.7 (NOVEMBER 1993)
---------------------------
Now supports MULTITOS!!!!! This file uses only 128kB of memory and
should work with files of any size. Files are only partially loaded in
blocks no longer than 4096 bytes long, in order to conserve memory.
I finally got this program to work. I had to rewrite Version 2.1,
because of a problem encountered with a cache program that erased all
the files on my Falcon030. That's why it took so long.
Joystick calculating routine has been incredibly sped up so it only
now takes about 1 second to get the correct value.
In the window, there is now a listing of important values used by the
program, so if there is any problem using it on your system, you can
just tell me the numbers it found to help figure out the problem.
DEFAULTS.DAT is now renamed to DEFxxxx.DAT where "xxxx" is the TOS
version and all the values are listed in hexadecimal to make it easier
to read.
All *.PRG files can be dragged onto the STOSFX27.PRG icon(if using a
TOS version that supports putting icons on the desktop).
Version 3.0 (May 1994)
----------------------
Translated to HiSoft BASIC 2.10 from GFA Basic due to the fact that I
had the program crash under MultiTOS numerous times. Now, it uses
resource files to display the menu, instead of graphic calls. This
gives the program a cleaner look and provides 3-D buttons on AES
versions that support it.
It works really well under MultiTOS. I have had no crashes as of yet
while running it.
A bug was fixed in this version. If a directory had a "." in it, the
"123" file created would be put some unknown place, instead of the
correct directory. This no longer is the case.
Other Notes
-----------
FOR TOS Versions 4.0 and higher:
--------------------------------
The MMU cache doesn't need to be disabled. Also, don't run the
interpreter or game files under MultiTOS as they will cause an
"Illegal instruction" error, or something like that, and they will not
run.
For some reason, after the addresses are put in the table the program
may not work. Just change the ".PRG" extensions to ".TOS" for game
files. But the interpreter and run-time files must be auto-booted.
All STOS files must be run in ST resolutions.
Doing this should make the files work without a problem on your TOS
version.
The speed increase is amazing in comparison with an 8 MHz STe.
(----------------------------------------------------------------------)
FOR EVERY TOS VERSION:
After it finds the joystick address, it will ask you if you want to
save the results as defaults. If you select YES, then it will save the
results to disk to the default file. These values will then be in
memory every time the program is run, so that when you want to allow
other STOS compiled programs to work on your TOS, you don't have to go
through constant testing of the joystick address.
When it writes the file to disk with the changes, it also turns the
FastLoad option on.
If you have any questions, comments or anything else you want to tell
me, or if this just doesn't work at all, send me e-mail to:
(R.QUEZADA) on GEnie or
(72122,2651) on CompuServe.
Robert Quezada.
There may be a chance that this might not work on early STs with the
TOS 2.06 conversion board. I think that I have fixed the problem with
the original program so that it will now work on those STs. But if it
doesn't, the default values that are supplied with the program are for
TOS 2.06.
Also available:
Punkman jr 2 (Atari Portfolio)
-------------------------------
Vertical scrolling Pacman clone that runs really fast and smooth.
Instead of the normal 240x64 graphics resolution of the Portfolio you
get a scrolling screen with a 240x200 graphics resolution.